Click image to view full size image
Quarter Cut Bamboo Wood Veneer MDF For Cabinets
Quick Detail:
1.Bamboo veneer
2.veneer type:natural wood veneer
3.Grain: Carbonize Horizontal (quarter cut)
4.Size:2500mm*650mm/430mm*0.3mm/0.5mm
5.Bamboo veneer can be used for flooring,interior panelling,counter tops,Cabinetry,Furniture consturction,and any other interior use where wood products have traditionally been used
Description:
Bamboo veneer provide same colors and grains as bamboo panels but in significant lower cost!
Bamboo veneer is sliced from pressed bamboo blocks. It provides same colors and grains as bamboo panels. It could be applied on plywood veneering, indoor decorating, engineered flooring etc. To avoid cracks during handling, our bamboo veneer is backed with a thin, but strong cellulose fleece or paper, which enables easy pressing of the veneer sheets on a panel.
The production process-stip to product(the strips can be connected in 5 different ways:)
1.Plain pressed
The bamboo strips are pressed against each other horizontally and glued under high pressure,the characteristic bamboo nodes are clearly visible
2.Side pressed
the bamboo stips are pressed against each other vertically and glued under high pressure,the characteristic bamboo nodes are not very pronouned
3.Weaving thread
The strips are connected by means of weaving thread,Additionally,a fabric backing is applied to make the product more rigid,this is the base material for the carpet/tile products
4.Tape
The strips are connected by means of placing tape on the reverse,
Additionally,a fabric backing is applied to make the product more rigid,this can also be used as the base material for the carpet/tile products
5.Density
This is a created in a different way,the bamboo strips are crushed and pressed together with extreme high presure,this process changes the structure completely,creating a very durable end product that is equal to the hardness of a wood such as Jatoba
<
Quarter Cut Bamboo Wood Veneer MDF For Cabinets
